Blocking wheels

Place suitable blocks 1 at both the front and

Place suitable blocks 1 at both the front and back of the wheel diagonally opposite the flat tire to prevent the vehicle from moving when it is jacked up.

Be sure to block the wheel as the

Be sure to block the wheel as the vehicle may move and result in personal injury.

    See also:

    Uniform tire quality grading
    DOT (Department of Transportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable on ...

    Releasing the trunk lid
    Releasing the trunk lid Press the button for longer than 0.5 seconds to open the trunk lid. The trunk release button will not operate when the ignition switch is placed in the ON position. ...

    Push starting
    Do not attempt to start the engine by pushing. Continuously Variable Transmission (CVT) models cannot be push-started or tow-started. Attempting to do so may cause transmission damage. ...