Two-Wheel Drive (2WD) models

Two-Wheel Drive (2WD) models
Two-Wheel Drive (2WD) models

NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated.

- Never tow Continuously Variable

- Never tow Continuously Variable Transmission (CVT) models with the front wheels on the ground or four wheels on the ground (forward or backward), as this may cause serious and expensive damage to the transmission. If it is necessary to tow the vehicle with the rear wheels raised, always use towing dollies under the front wheels.

- When towing CVT models with the front wheels on towing dollies:
— Turn the ignition switch to the OFF position, and secure the steering wheel in a straightahead position with a rope or similar device.

— Move the selector lever to the N (Neutral) position.

- When towing a CVT model with the rear wheels on the ground (if you do not use towing dollies): Always release the parking brake.

    See also:

    USB (Universal Serial Bus) devices (if so equipped)
    This system supports various USB memory sticks, USB hard drives and iPod® players. There are some USB devices which may not be supported with this system. - Make sure that the USB device is con ...

    Freeing a frozen door lock
    To prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the remote keyless entry keyfob (if ...

    LATCH lower anchor location
    LATCH lower anchor location The LATCH lower anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LATCH lower anchors. ...