Capacities and recommended fuel/lubricants

1: For additional information, see “Engine oil” in the “8. Maintenance and

1: For additional information, see “Engine oil” in the “8. Maintenance and do-it-yourself” section for changing engine oil.

2: For additional information, see “Engine oil and oil filter recommendation” later in this section.

3: Use only Genuine NISSAN CVT Fluid NS-2. Using transmission fluid other than Genuine NISSAN CVT Fluid NS-2 will damage the CVT, which is not covered by the NISSAN new vehicle limited warranty.

4: For hot climates, viscosity SAE 90 is suitable for ambient temperatures above 328F (08C).

5: Available in mainland U.S.A. through a NISSAN dealer.

6: For additional information, see “Vehicle identification” later in this section for air conditioner specification label.

See also:

Selecting the correct oil filter
Your new NISSAN vehicle is equipped with a high-quality genuine NISSAN oil filter. When replacing, use a genuine NISSAN oil filter or its equivalent for the reason described in “Change inter ...

Changing engine oil
QR25DE VQ35DE 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature, then turn it off. 3. Remove the ...

Safety chains
Always use suitable safety chains between your vehicle and the trailer. The safety chains should be crossed and should be attached to the hitch, not to the vehicle bumper or axle. Be sure to leave ...