Hitch ball
Choose a hitch ball of the proper size and
weight rating for your trailer:
- The required hitch ball size is stamped on
most trailer couplers. Most hitch balls also
have the size printed on top of the ball.
- Choose the proper class hitch ball based on the trailer weight.
- The diameter of the threaded shank of the hitch ball must be matched to the ball mount hole diameter. The hitch ball shank should be no more than 1/16´´ smaller than the hole in the ball mount.
- The threaded shank of the hitch ball must be long enough to be properly secured to the ball mount. There should be at least 2 threads showing beyond the lock washer and nut.
See also:
Keyfob
Replace the battery in the keyfob as follows:
1. Remove the screw.
2. Insert a small screwdriver into the slit of the
corner and twist it to separate the upper part
from the lower part. Use a ...
Satellite radio reception (if so equipped)
When the satellite radio is used for the first time
or the battery has been replaced, the satellite
radio may not work properly. This is not a malfunction.
Wait more than 10 minutes with satellite
...
Styling
The Sentra's tall stance and short hood and trunklid make the car look a bit
stubby in profile. It's not nearly as sleek as the Civic, which is still
futuristic looking even though it's been aroun ...