Speedometer and odometer
Speedometer and odometer
Speedometer
The speedometer indicates the vehicle speed.
Odometer/Twin trip odometer
The odometer/twin trip odometer is displayed when the ignition switch is placed in the ON position.
The odometer records the total distance the vehicle has been driven.
The twin trip odometer records the distance of individual trips.
Changing the display
Push the change button (3)- to change the display as follows:
Resetting the trip odometer:
Push the change button for more than 1 second to reset the currently displayed trip odometer to zero.
Elapsed time, driving distance and average speed information is also available. Refer to Control panel buttons in the Monitor, climate, audio, phone and voice recognition systems section in this manual.
See also:
If your vehicle is stolen
If your vehicle is stolen, you should change the
codes of any non-rolling code device that has
been programmed into HomeLink . Consult the
Owner’s Manual of each device or call the manufacturer
...
Rolling code programming
Rolling code garage door openers (or other rolling
code devices) which are “code protected”
and manufactured after 1996, may be determined
by the following:
● Reference the garage door o ...
To protect your vehicle from corrosion
-Wash and wax your vehicle often to keep the
vehicle clean.
- Always check for minor damage to the paint
and repair it as soon as possible.
- Keep drain holes at the bottom of the doors
open t ...