Hazard warning flasher switch
Push the switch on to warn other drivers when you must stop or park under emergency conditions.
All turn signal lights flash.
WARNING:
- If stopping for an emergency, be sure to move the vehicle well off the road.
- Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that your vehicle might become a hazard to other traffic.
- Turn signals do not work when the hazard warning flasher lights are on.
The flashers will operate with the ignition switch placed in any position.
Some state laws may prohibit the use of the hazard warning flasher switch while driving.
See also:
Intelligent Key door buzzer (if so equipped)
When the chime or buzzer sounds from inside
and outside the vehicle, check for the following:
- The ignition switch is turned to the LOCK
position.
- The intelligent Key is not left inside the ...
Shoulder belt height adjustment
(Sedan, front seats)
The shoulder belt anchor height should be adjusted
to the position best for you. See “Precautions
on seat belt usage” earlier in this section. To
adjust, pull out the adjustment button 1 and
...
Connecting procedure
NOTE:
The connecting procedure must be performed
when the vehicle is stationary. If the
vehicle starts moving during the procedure,
the procedure will be cancelled.
1. Press the button on t ...