Heated steering wheel (if so equipped)

The heated steering wheel system is designed to

The heated steering wheel system is designed to operate only when the surface temperature of the steering wheel is below 68°F (20°C).

Push the heated steering wheel switch to warm the steering wheel after the engine starts. The indicator light will come on.

If the surface temperature of the steering wheel is below 68°F (20°C), the system will heat the steering wheel and cycle off and on to maintain a temperature above 68°F (20°C). The indicator light will remain on as long as the system is on.

Push the switch again to turn the heated steering wheel system off manually. The indicator light will go off.

NOTE:

If the surface temperature of the steering wheel is above 68°F (20°C) when the switch is turned on, the system will not heat the steering wheel. This is not a malfunction.

    See also:

    Changing wheels and tires
    Tire rotation NISSAN recommends rotating the tires every 7,500 miles (12,000 km). See Flat tire in the In case of emergency section of this manual for tire replacing procedures. As soon as ...

    Heating
    This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets and outboard vents. 1. Push the button to the off position for normal heating. 2. Turn ...

    Rear-facing child restraint installation using the seat belts
    WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being ...