Locking with power door lock switch

To lock all the doors without a key, push the door

To lock all the doors without a key, push the door lock switch (drivers or front passengers side) to the lock position (1) . When locking the door this way, be certain not to leave the key inside the vehicle.

To unlock all the doors without a key, push the door lock switch (drivers or front passengers side) to the unlock position (2).

Lockout protection

When the power door lock switch (drivers or front passengers side) is moved to the lock position with the Intelligent Key in the port and any door open, all doors will lock and unlock automatically. With the Intelligent Key left in the vehicle (not in the Intelligent Key port) and any door open, all doors will unlock automatically and a chime will sound after the door is closed.

    See also:

    Vehicle Dynamic Control (VDC) system
    The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving situations, the system will control braking and engine output to ...

    Tire Pressure Monitoring System (TPMS)
    This vehicle is equipped with the Tire Pressure Monitoring System (TPMS). It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit and the CHECK ...

    Drive belt
    1. Power steering fluid pump. 2. Generator. 3. Air conditioner compressor. 4. Crankshaft pulley. WARNING: Be sure the ignition switch is in the OFF or LOCK position before servicing drive bel ...