Manual operation (if so equipped)
Tilt and telescopic operation
Pull the lock lever (1) all the way towards you:
- Adjust the steering wheel forward or backward in direction (2)- to the desired position.
- Adjust the steering wheel up or down in direction (3)- to the desired position.
Lock the steering wheel by releasing the lock lever. Make sure the lock lever has returned to its original position to lock the steering wheel in place.
WARNING:
Do not adjust the steering wheel while driving. You could lose control of your vehicle and cause an accident.
See also:
Environmental factors influence the rate of corrosion
Moisture
Accumulation of sand, dirt and water on the vehicle
body underside can accelerate corrosion.
Wet floor coverings will not dry completely inside
the vehicle and should be removed for dry ...
Rocking a stuck vehicle
If your vehicle is stuck in sand, snow, mud, etc.,
use the following procedure:
1. Turn off the Vehicle Dynamic Control (VDC)
system.
2. Make sure the area in front and behind the
vehicle is ...
Training phrases
During the SA mode, the system instructs you to
say the following phrases.
(The system will prompt you for each phrase.)
- phonebook transfer entry
- dial 3 0 4 2 9
- delete call back number ...