Manual operation

Fan speed control

Turn the dial to manuallyfan speed control dial to manually control the fan speed.

Push the AUTO button to return to automatic control of the fan speed.

Air recirculation Push the air recirculation button to recirculate interior air inside the vehicle. The indicator light on the button will come on.

The air recirculation cannot be activated when the air conditioner is in the front defrosting mode or the front defrosting and foot outlet mode.

Air recirculation

Push the button to recirculate air recirculation button to recirculate interior air inside the vehicle. The indicator light on the button will come on. indicator light on the button will come on.

The air recirculation cannot be activated when the air conditioner is in the defrostingfront defrosting mode or the and foot outletfront defrosting and foot outlet mode.

Fresh air intake

Push the button to drawfresh air intake button to draw outside air into the passenger compartment.

The button will comeindicator light on the button will come on.

Automatic intake air control

In the AUTO mode, the intake air will be controlled automatically. To manually control the intake air, push the recirculation button. air recirculation button.

To return to the automatic control mode, push and hold the button orair recirculation button or push and hold the intake buttonfresh air intake button for about 2 seconds. The indicator lights (both air recirculation and fresh air intake buttons) will flash twice, and then the intake air will be controlled automatically.

Air flow control

Pushing the MODE button manually controls air flow and selects the air outlet:

side- Air flows from center and side vents.

side- Air flows from center and side vents and foot outlets.

outlets. - Air flows mainly from foot outlets.

foot- Air flows from defroster and foot outlets.

outlets. - Air flows from defroster outlets.

To turn system off

Press the OFF button.

    See also:

    Anti-lock Braking System (ABS) warning light
    or When the ignition switch is placed in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warn ...

    Head restraints
    Head restraints supplement the other vehicle safety systems. They may provide additional protection against injury in certain rear end collisions. Adjust the head restraints properly, as spe ...

    Removing spots
    Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available ...