Operating tips

-When the engine coolant temperature and

-When the engine coolant temperature and outside air temperature are low, the air flow from the foot outlets may not operate for a maximum of 150 seconds. However, this is not a malfunction. After the coolant temperature warms up, air flow from the foot outlets will operate normally.

The sunload sensor, located on the top drivers side of the instrument panel, helps the system maintain a constant temperature. Do not put anything on or around this sensor.

    See also:

    Heater operation
    Heating: This mode is used to direct heated air to the foot outlets. 1. Push the air recirculation button to the OFF position. (The indicator light turns off.) 2. Turn the air flow control ...

    Adjusting the screen (models without Navigation System)
    Adjusting the screen (models without Navigation System) To adjust the quality of the screen, press the setting control knob on the audio system. ● To adjust the Brightness or Contrast, pre ...

    Extended storage switch (if so equipped)
    NOTE: The extended storage switch is used for long term vehicle storage. Even if the extended storage switch is broken it is not necessary to replace it. Replace only the open fuse in the switc ...