Before starting
To get the best recognition performance from Voice Recognition, observe the following:
- The interior of the vehicle should be as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noise and vibration sounds, etc.), which may prevent the system from correctly recognizing the voice commands.
- Wait until the tone sounds before speaking a command.
- Speak in a natural conversational voice without pausing between words.
- If the air conditioner is set to Auto, the fan speed is automatically lowered so that your commands can be recognized more easily.
See also:
After the operation
1. Lower the vehicle carefully to the ground.
2. Dispose of waste oil and filter properly.
- Prolonged and repeated contact
with used engine oil may cause skin
cancer.
- Try to avoid direct ...
How to speak numbers
Voice Recognition requires a certain way to
speak numbers when giving voice commands.
Refer to the following examples.
General rule:
● Only single digits 0 (zero) to 9 can be used.
● ...
Rocking a stuck vehicle
If your vehicle is stuck in sand, snow, mud, etc.,
use the following procedure:
1. Turn off the Vehicle Dynamic Control (VDC)
system.
2. Make sure the area in front and behind the
vehicle is ...