See also:

Clearing the programmed information
Individual buttons cannot be cleared. However, to clear all programming, press and hold the two outside buttons and release when the indicator light begins to flash (approximately 20 seconds). ...

Locking doors
Locking doors 1. Place the ignition switch in the LOCK position. (Remove the key if any key is in the ignition switch.) 2. Close all doors. 3. Push any door handle request switch 1 while ca ...

Freeing a frozen door lock
To prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole, or use the remote keyless entry keyfob (i ...