See also:

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

Warning lights
For additional information on warnings and indicators, see Vehicle information display later in this section. Anti-lock Braking System (ABS) warning light When the ignition switch is pla ...

Moving to a steep uphill
Moving to a steep uphill When moving the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display show ...