Install

1. Align the head restraint stalks with the holes

1. Align the head restraint stalks with the holes in the seat. Make sure the head restraint is facing the correct direction.
2. Push and hold the lock knob and push the head restraint down.
3. Properly adjust the head restraint before an occupant uses the seating position.

    See also:

    Precautions on cruise control
    -If the cruise control system malfunctions, it cancels automatically. WARNING: Do not use the cruise control when driving under the following conditions: - When it is not possible to keep the ...

    Audible reminder and warning when locking the doors
    When the chime or buzzer sounds from inside and outside the vehicle, check for the following. ● The ignition switch is placed in the LOCK position. ● The Intelligent Key is not left ...

    Most common factors contributing to vehicle corrosion
    -The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. - Damage to paint and other protective coatings caused by gravel and stone chips or ...