Installing top tether strap

First, secure the child restraint with the LATCH

First, secure the child restraint with the LATCH lower anchors (rear outboard seat positions only) or the seat belt, as applicable.

1. Flip up the anchor cover 1 from the anchor point which is located directly behind the child seat.
2. Position the top tether strap over the top of the seatback 2 .> 3. Secure the tether strap to the tether anchor point on the rear parcel shelf 3 .> 4. Refer to the appropriate child restraint installation procedure steps in this section before tightening the tether strap.

To remove or reinstall the tether anchor covers, see “Upper tether anchor/key cylinder covers” in the “Maintenance and do-it-yourself” section of this manual.

If you have any questions when installing a top tether strap, consult your NISSAN dealer for details.

    See also:

    Initialization
    When the ignition switch is placed in the ON position, NISSAN Voice Recognition is initialized, which takes a few seconds. If the button is pushed before the initialization completes, the sys ...

    Styling & Interior
    The Rogue's styling had been a bit anonymous, but a few exterior changes — more creases up front, extra chrome along the doors and grille — add some character. The silhouette remains the same, ...

    Fail-safe
    If the vehicle is driven under extreme conditions, such as excessive wheel spinning and subsequent hard braking, the fail-safe system may be activated. The MIL may come on to indicate the fail-saf ...