Speedometer and odometer

See also:

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

Instrument brightness control
The instrument cluster illuminates when the ignition switch is placed in the ON position. The instrument brightness control operates when the headlight control switch is in the AUTO or positi ...

Rocking a stuck vehicle
If your vehicle is stuck in sand, snow, mud, etc., use the following procedure: 1. Turn off the Vehicle Dynamic Control (VDC) system. 2. Make sure the area in front and behind the vehicle is ...