Checking bulbs
With all doors closed, apply the parking brake and place the ignition switch in the ON position without starting the engine. The following lights will come on:
The following lights come on briefly and then go off:
If any light fails to come on, it may indicate a burned-out bulb or an open circuit in the electrical system. Have the system repaired promptly.
See also:
Before starting the engine
● Make sure the area around the vehicle is
clear.
● Check fluid levels such as engine oil, coolant,
brake and clutch fluid (if so equipped),
and windshield-washer fluid as frequentl ...
Maximum Gross Vehicle Weight (GVW)/Maximum Gross Axle Weight (GAW)
The GVW of the towing vehicle must not exceed
the Gross Vehicle Weight Rating (GVWR)
shown on the F.M.V.S.S./C.M.V.S.S. certification
label. The GVW equals the combined weight of
the unloade ...
Engine block heater (if so equipped)
WARNING:
- Do not use your engine block heater
with an ungrounded electrical system
or a 2-pronged adapter. You can be seriously
injured by an electrical shock if
you use an ungrounded connec ...