Continuously Variable Transmission (CVT) position indicator light (if so equipped)

When the ignition switch is placed in the ON

When the ignition switch is placed in the ON position, this indicator light shows the shift selector position. See “Driving the vehicle” in the “Starting and driving” section of this manual.

    See also:

    Maximum load limits
    Maximum trailer loads Never allow the total trailer load to exceed the value specified in the Towing Load/Specification chart found later in this section. The total trailer load equals trailer w ...

    Removing covers from rear parcel shelf
    Remove the top tether anchor cover or key cylinder cover as follows: 1. Lift the cover to the full open position. 2. Rotate the cover in the direction shown, disengaging the hinge at 1 and sli ...

    Brake pad wear warning
    The disc brake pads have audible wear warnings. When a disc brake pad requires replacement, it makes a high pitched scraping sound when the vehicle is in motion, whether or not the brake pedal is ...