Instrument brightness control
The instrument cluster illuminates when the ignition switch is placed in the ON position.
The instrument brightness control operates when
the headlight control switch is in the
AUTO 
or
position.
Turn the control left or right to adjust the brightness of the instrument panel lights when driving at night.
See also:
Environmental factors influence the rate of corrosion
Moisture
Accumulation of sand, dirt and water on the vehicle
body underside can accelerate corrosion.
Wet floor coverings will not dry completely inside
the vehicle and should be removed for dry ...
Explanation of general maintenance items
Additional information on the following
items with “ * ”is found later in this section.
Outside the vehicle
The maintenance items listed here should be
performed from time to time, unless othe ...
Supplemental air bag warning labels
Warning labels about the supplemental frontimpact
air bag system are placed in the vehicle as
shown in the illustration. ...