Unlocking doors

1. Press the button on the

1. Press the Intelligent button on the Intelligent Key.

2. The hazard warning lights flash once.

3. Press the 5 seconds button again within 5 seconds to unlock all doors.

All doors will be locked automatically unless one of the following operations is performed within 1 minute after pressing the ● Opening any doors. button:

● Opening any doors.

● Pushing the ignition switch.

The interior light illuminates for 15 seconds when a door is unlocked and the room light switch is in the DOOR position.

The light can be turned off without waiting for 15 seconds by performing one of the following operations:

● Placing the ignition switch in the ON position.
● Locking the doors with the Intelligent Key.
● Switching the room light switch to the OFF position.

    See also:

    Automatic moonroof
    Automatic moonroof The moonroof will only operate when the ignition switch is placed in the ON position. The automatic moonroof is operational for about 45 seconds, even if the ignition switc ...

    Reprogramming a single HomeLink® button
    To reprogram a HomeLink® Universal Transceiver button, complete the following. 1. Push and hold the desired HomeLink® button. Do not release the button until step 4 has been completed. 2. Wh ...

    Opener operation
    WARNING: - Do not drive with the trunk lid open. This could allow dangerous exhaust gases to be drawn into the vehicle. See Exhaust gas in the Starting and driving section of this manual. ...