Electric control type
The outside mirror remote control only operates when the ignition switch is in the ACC or ON position.
Rotate the control lever to select the right or left mirror. Adjust the mirror to the desired position by moving the control lever.
See also:
Compass display
Compass display
Push the button for about 1 second when
the ignition switch is placed in the ON position to
toggle the outside temperature and compass
direction display on or off. The display ...
Clearing the programmed information
Individual buttons cannot be cleared, however to
clear all programming, push and hold the two
outside buttons and release when the indicator
light begins to flash (in approximately 20
seconds) ...
Latch lower anchor location
Latch lower anchor location
The Latch lower anchors are located at the rear
of the seat cushion near the seatback. A label is
attached to the seatback to help you locate the
Latch lower ancho ...