See also:

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

Vehicle set-up
1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. Turn the engine off and wait more than 10 min ...

Exterior front
1. Engine hood 2. Windshield wiper and washer switch 3. Windshield 4. Moonroof (if so equipped) 5. Power windows (if so equipped) 6. Door locks, keyfob (if so equipped), NISSAN Intellige ...