Dehumidified heating

This mode is used to heat and dehumidify the air.
1. Press the position. button to the OFF position.
2. Press the button. air flow control button.
3. Turn the fan control dial to the desired position.
4. Push the button. The indicator light comes on.
5. Turn the temperature control dial to the desired position.

    See also:

    Loading tips
    ● The GVW must not exceed GVWR or GAWR as specified on the F.M.V.S.S./C.M.V.S.S. certification label. ● Do not load the front and rear axle to the GAWR. Doing so will exceed the ...

    Troubleshooting guide
    The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution ...

    How to arm the vehicle security system
    1. Close all windows. (The system can be armed even if the windows are open.) 2. Remove the Intelligent Key from the vehicle. 3. Close all doors, hood and trunk. Lock all doors. The doors can be l ...