To turn system off
Press the /OFF button.
See also:
Connecting procedure
NOTE:
The connecting procedure must be performed
when the vehicle is stationary. If the
vehicle starts moving during the procedure,
the procedure will be cancelled.
1. Press the button on the ...
Windshield wiper blades. Replacing
Replace the wiper blades if they are worn.
1. Lift the wiper arm away from the windshield.
2. Push the release tab, then move the wiper
blade down the wiper arm to remove.
3. Remove the wiper bla ...
Before starting
To get the best recognition performance from
Voice Recognition, observe the following:
- The interior of the vehicle should be as quiet
as possible. Close the windows to eliminate
the surroundi ...