Gallery

    See also:

    Installing top tether strap
    First, secure the child restraint with the LATCH lower anchors (rear outboard seat positions only) or the seat belt, as applicable. 1. Flip up the anchor cover 1 from the anchor point which i ...

    Removing covers from rear parcel shelf
    Remove the top tether anchor cover or key cylinder cover as follows: 1. Lift the cover to the full open position. 2. Rotate the cover in the direction shown, disengaging the hinge at 1 and sli ...

    Forward-facing child restraint installation using the seat belts
    WARNING: The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not be ...