Brake system

The brake system has two separate hydraulic circuits. If one circuit malfunctions, you will still have braking at 2 wheels.

See also:

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

Rear Control Cancel Switch (if so equipped)
The rear control cancel switch operates when the ignition switch is placed in the ACC or ON position. The rear control cancel switch is located on the left side of the instrument panel. Pushin ...

Precautions on seat belt usage
If you are wearing your seat belt properly adjusted, and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident ...