Pulling a stuck vehicle
WARNING
To avoid vehicle damage, serious personal injury or death when recovering a stuck vehicle:
● Contact a professional towing service to recover the vehicle if you have any questions regarding the recovery procedure.
● Do not use the vehicle tie-downs to tow or free a stuck vehicle.
● Only use devices specifically designed for vehicle recovery and follow the manufacturer’s instructions.
● Always pull the recovery device straight out from the front of the vehicle. Never pull at an angle.
● Route recovery devices so they do not touch any part of the vehicle except the attachment point.
If your vehicle is stuck in sand, snow, mud, etc., use a tow strap or other device designed specifically for vehicle recovery. Always follow the manufacturer’s instructions for the recovery device.
Do not use the tie-down hooks for towing or vehicle recovery.
See also:
Push-Button Ignition Switch
Push-Button Ignition Switch
WARNING:
Do not operate the push-button ignition
switch while driving the vehicle except in
an emergency. (The engine will stop when
the ignition switch is pushed ...
Headlight beam select
1 To select the high beam function, push the
lever forward. The high beam lights come on
and the light illuminates.
2 Pull the lever back to select the low beam.
3 Pulling and releasing the lev ...
Silencing the horn beep feature
If desired, the horn beep feature can be deactivated
using the Intelligent Key.
To deactivate: Press and hold the
and buttons for at least 2 seconds.
The hazard warning lights will flash 3 tim ...