Glass
When cleaning the rear window, it may be easier to clean if the high-mounted stop light (if so equipped) is removed first.
Be careful when removing the high-mounted stop light to reduce the risk of damaging the high-mounted stop light wires.
To remove the high-mounted stop light:
1 Push toward rear of vehicle.
2 Lift to remove.
The high-mounted stop light must be properly reinstalled before driving your vehicle.
Use glass cleaner to remove smoke and dust film from the glass surfaces. It is normal for glass to become coated with a film after the vehicle is parked in the hot sun. Glass cleaner and a soft cloth will easily remove this film.
CAUTION
When cleaning the inside of the windows, do not use sharp-edged tools, abrasive cleaners or chlorine-based disinfectant cleaners. They could damage the electrical conductors, radio antenna elements or rear window defroster elements.
See also:
Booster seat installation
Do not use the lap/shoulder belt Automatic
Locking Retractor (ALR) mode
when using a booster seat with the
seat belts.
Refer to all Warnings and Cautions in the “Child
safety”, “Chi ...
Receiving a call
When you hear the ring tone, press the
button on the steering wheel.
Once the call has ended, press the
button
on the steering wheel.
NOTE:
If you do not wish to take the call when you
hear ...
Safety
All-disc antilock brakes with electronic brake-force distribution and brake
assist are standard. Side-impact airbags and side curtain-type airbags that
protect outboard occupants in all three rows ...