Aluminum alloy wheels (if so equipped)
Wash the wheels regularly with a sponge dampened in a mild soap solution, especially during winter months in areas where road salt is used. If not removed, road salt can discolor the wheels.
CAUTION
Follow the directions below to avoid staining or discoloring the wheels:
● Do not use a cleaner that uses strong acid or alkali contents to clean the wheels.
● Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as ambient temperature.
● Rinse the wheel to completely remove the cleaner within 15 minutes after the cleaner is applied.
See also:
Draining of coolant water
If the vehicle is to be left outside without antifreeze,
drain the cooling system, including the
engine block. Refill before operating the vehicle.
For details, see “Engine cooling system” in ...
Additional features
For more information about the iPod player
available with this system, see “iPod player operation
with Navigation System” in this section.
For more information about the USB interface
avail ...
Installing front license plate
Use the following steps to mount the front license
plate:
(1) Make holes on the plastic finisher at the
location mark (small dimple) using a 0.31 in
(8 mm) drill. Apply light pressure to the ...