See also:

Replacing
Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. 2. Push and hold the release tab A , and move the wiper blade down the wiper arm 1 . 3. Insert the n ...

Clearing the programmed information
Individual buttons cannot be cleared. However, to clear all programming, press and hold the two outside buttons and release when the indicator light begins to flash (approximately 20 seconds). ...

Brake and clutch (if so equipped) fluid
For further brake and clutch fluid specification information, refer to “Capacities and recommended fuel/lubricants” in the “Technical and consumer information” section of this manual. WARN ...