Emission control information label

The emission control information label is attached

The emission control information label is attached to the underside of the hood as shown.

    See also:

    Checking bulbs
    With all doors closed, apply the parking brake and place the ignition switch in the ON position without starting the engine. The following lights will come on: If equipped, the following li ...

    Forward-facing child restraint installation using latch
    Refer to all Warnings and Cautions in the Child Safety and Child Restraint sections before installing a child restraint. Follow these steps to install a forward-facing child restraint using the ...

    Readiness for Inspection/Maintenance (I/M) test
    A vehicle equipped with All-Wheel Drive (AWD) should never be tested using a two wheel dynamometer (such as the dynamometers used by some states for emissions testing), or similar equipment. M ...