Trailer lights
CAUTION
When splicing into the vehicle electrical system, a commercially available powertype module/converter must be used to provide power for all trailer lighting. This unit uses the vehicle battery as a direct power source for all trailer lights while using the vehicle tail light, stoplight and turn signal circuits as a signal source. The module/converter must draw no more that 15 milliamps from the stop and tail lamp circuits. Using a module/converter that exceeds these power requirements may damage the vehicle’s electrical system. See a reputable trailer dealer to obtain the proper equipment and to have it installed.
Trailer lights should comply with federal and/or local regulations. For assistance in hooking up trailer lights, contact a NISSAN dealer or reputable trailer dealer.
See also:
Overview
Small on the outside, big on the inside. Smart technology with
next-generation efficiency. A $10,990 starting M.S.R.P. and low cost of
ownership. New dual injector system and sub-planetary CVT des ...
Heater and air conditioner (manual)
(if so equipped)
WARNING
● The air conditioner cooling function operates
only when the engine is running.
● Do not leave children or adults who
would normally require the assistance
of others alone in ...
Receiving a call
When you hear a phone ring, the display will
change to phone mode. To receive a call, follow
one of the procedures listed below.
a. Select the Answer key on the display.
b. Press the PHONE but ...