Continuously Variable Transmission (CVT) (if so equipped)
Without Intelligent Key
The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the shift selector is moved to the P (Park) position.
● When moving the ignition switch to the LOCK position, make sure the shift selector is in the P (Park) position.
With Intelligent Key
● When removing the key from the ignition switch, make sure the shift selector is in the P (Park) position.
When the ignition switch cannot be turned to the LOCK position.
1. Shift the shift selector to the P (Park) position.
2. Turn the ignition switch slightly in the ON direction.
3. Turn the ignition switch to the LOCK position.
4. Remove the key if it is inserted in the ignition switch.
If the ignition switch is turned to the LOCK position, the shift selector cannot be moved from the P (Park) position.
The shift selector can be moved if the ignition switch is placed in the ON position and the foot brake pedal is depressed.
There is an OFF position between the LOCK and ACC positions. The OFF position is indicated by a “1” on the key cylinder.
See also:
How to use remote keyless entry system
How to use remote keyless entry system
1 LOCK button
2 UNLOCK button
3 PANIC button ...
Bird’s-eye view
The bird’s-eye view shows the overhead view of
the vehicle which helps confirm the vehicle
position and the predicted course to a parking
space.
The vehicle icon 1 shows the position of the ...
Jump starting
To start your engine with a booster battery, the
instructions and precautions below must be followed.
If the battery of a vehicle equipped with the
NISSAN Intelligent Key ™ is discharged, the
...