Shift lock release
Shift lock release
If the battery is discharged, the shift selector may not be moved from the P (Park) position even with the brake pedal depressed.
To move the shift selector, release the shift lock.
The shift selector can be moved to N (Neutral).
To push the shift lock release, complete the following procedure.
1. Turn the ignition switch to the LOCK position and remove the key 2. Apply the parking brake.
3. Remove the shift lock release cover as shown.
4. Insert a small screwdriver in the shift lock release slot and push down.
5. Move the shift selector to the N (Neutral) position while holding down the shift lock release.
6. Now the vehicle may be moved to the desired location.
If the shift selector cannot be moved out of P (Park), have a NISSAN dealer check the transmission as soon as possible.
If the shift selector cannot be moved from the P (Park) position while the engine is running and the brake pedal is depressed, the stop lights may not work. Malfunctioning stop lights could cause an accident injuring yourself and others.
See also:
Off-road recovery
While driving, the right side or left side wheels
may unintentionally leave the road surface. If this
occurs, maintain control of the vehicle by following
the procedure below. Please note that t ...
Readiness for inspection/maintenance (I/M) test
Due to legal requirements in some states and
Canadian Provinces, your vehicle may be required
to be in what is called the ready condition
for an Inspection/Maintenance (I/M) test of
the emissi ...
Brake and clutch (if so equipped) fluid
For further brake and clutch fluid specification
information, refer to “Capacities and recommended
fuel/lubricants” in the “Technical and
consumer information” section of this manual.
...