Shifting
Shifting
To change gears or when upshifting or downshifting, depress the clutch pedal fully, shift into the appropriate gear, then release the clutch slowly and smoothly.
To ensure smooth gear changes, fully depress the clutch pedal before operating the shift selector.
If the clutch pedal is not fully depressed before the transmission is shifted, a gear noise may be heard. Transmission damage may occur.
Start the vehicle in 1st gear and shift to 2nd, 3rd, 4th and 5th up to 6th gear in sequence according to vehicle speed.
To back up, lift up on the shift selector ring 1 and then move it to the R (Reverse) position after stopping the vehicle completely.
The shift selector ring 1 returns to its original position when the shift selector is moved to the N (Neutral) position.
If it is difficult to move the shift selector into R (Reverse) or 1 (1st), shift into N (Neutral), then release the clutch pedal. Depress the clutch pedal again and shift into R (Reverse) or 1 (1st).
See also:
EXTERIOR
The 2010 Pathfinder is unapologetically boxy. It could have been built with
giant Duplo blocks. However, it's not bad-looking. It's tough, strong and
doesn't fool around. This is a truck that mean ...
MODE select switch (models with Navigation System)
Push the MODE select switch to change the
mode in the following sequence.
AM/FM* → XM** → CD*** → USB/AUX*** → AM/FM*
* When using the MODE switch, the audio mode
switche ...
Safety
Safety features include:
Standard side-impact and side curtain airbags
Standard stability system and traction control
Standard four-wheel antilock brakes
Available security system
...