Engine compartment
MR20DE engine
Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire.
NOTE:
For checking and replacing fuses on
QR25DE engine models, see a NISSAN
dealer.
If any electrical equipment does not come on, check for an open fuse.
1. Be sure the ignition switch and the headlight switch are OFF.
2. Open the engine hood.
3. Remove the fuse box cover by pushing the tabs A and lifting the cover up from the front B .
4. Remove the fuse with the fuse puller. The fuse puller is located in the center of the fuse block in the passenger compartment.
5. If the fuse is open A , replace it with a new fuse B .
6. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer.
MR20DE
Fusible links
If any electrical equipment does not operate and the fuses are in good condition, check the fusible links in the holders A , B and C on MR20DE models or in holder A on QR25DE models. If any of these fusible links are melted, replace only with genuine NISSAN parts.
For checking and replacing the fusible links in holders A and B and C , see a NISSAN dealer.
QR25DE
See also:
Drive belt
QR25DE engine
1. Power steering fluid pump pulley
2. Water pump pulley
3. Generator
4. Air conditioner
5. Crankshaft pulley
6. Drive belt Automatic tensioner
WARNING
Be sure the ignition swi ...
Rocking a stuck vehicle
● Stand clear of a stuck vehicle.
● Do not spin your tires at high speed.
This could cause them to explode and
result in serious injury. Parts of your
vehicle could also overheat ...
Exterior
The Nissan Rogue doesn't step all that far out of the box with its exterior.
The Rogue looks just like the Murano's little sister and has the same sloped
profile.
The only sparkle on the Rogue's ...