Measurement of weights
Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the vehicle is loaded, drive to a scale and weigh the front and the rear wheels separately to determine axle loads. Individual axle loads should not exceed either of the gross axle weight ratings (GAWR). The total of the axle loads should not exceed the gross vehicle weight rating (GVWR). These ratings are given on the vehicle certification label. If weight ratings are exceeded, move or remove items to bring all weights below the ratings.
See also:
Locking with key
Drivers side
The power door lock system allows you to lock or
unlock all doors at the same time.
Turning the key toward the front (1) of the vehicle
locks all doors.
Turning the key one time ...
Blocking wheels
Place suitable blocks 1 at both the front and
back of the wheel diagonally opposite the flat
tire to prevent the vehicle from moving when it is
jacked up.
Be sure to block the wheel as th ...
NISSAN Intelligent Key™ (if so equipped)
NISSAN Intelligent Key™
1. Two Intelligent Keys
2. Mechanical keys (inside Intelligent Keys)
3. Key number plate
Your vehicle can only be driven with the Intelligent
Keys which are regist ...