Class I hitch
Class I trailer hitch equipment (receiver, ball mount and hitch ball) can be used to tow trailers of a maximum weight of 2,000 lb (909 kg).
You may add Class I trailer hitch equipment that has a 2,000 lb (909 kg) maximum weight rating to the vehicle, but your vehicle is only capable of towing the maximum trailer weights shown in the Towing Load/Specification chart earlier in this section.
● Do not use axle-mounted hitches.
● The hitch should not be attached to or affect the operation of the impactabsorbing bumper.
● Do not modify the vehicle exhaust system, brake system, etc. to install a trailer hitch.
● To reduce the possibility of additional damage if your vehicle is struck from the rear, where practical, remove the receiver when not in use.
● After the hitch is removed, seal the bolt holes to prevent exhaust fumes, water or dust from entering the passenger compartment.
● Regularly check that all trailer hitch mounting bolts are securely mounted.
See also:
Vehicle load capacity
Do not exceed the load limit of your vehicle
shown as “The combined weight of
occupants and cargo” on the Tire and
Loading Information label. Do not exceed
the number of occupants shown as ...
Heated steering wheel (if so equipped)
The heated steering wheel system is designed to
operate only when the surface temperature of the
steering wheel is below 68°F (20°C).
Push the heated steering wheel switch to warm
the steer ...