Pre-towing tips

● Be certain your vehicle maintains a level position when a loaded and/or unloaded trailer is hitched. Do not drive the vehicle if it has an abnormal nose-up or nose-down condition; check for improper tongue load, overload, worn suspension or other possible causes of either condition.

● Always secure items in the trailer to prevent load shift while driving.

● Keep the cargo load as low as possible in the trailer to keep the trailer center of gravity low.

● Load the trailer so approximately 60% of the trailer load is in the front half and 40% is in the back half. Also make sure the load is balanced side to side.

● Check your hitch, trailer tire pressure, vehicle tire pressure, trailer light operation, and trailer wheel lug nuts every time you attach a trailer to the vehicle.

● Be certain your rearview mirrors conform to all federal, state or local regulations. If not, install any mirrors required for towing before driving the vehicle.

● Determine the overall height of the vehicle and trailer so the required clearance is known.

    See also:

    Getting the spare tire and tools
    1. Open the lift gate. 2. Remove the cargo cover (if so equipped). (See “Cargo cover” in the “2. Instruments and controls” section.) 3. Lift up the luggage floor board 1 (foldable or ...

    Temperature control dial
    The temperature control dial allows you to adjust the temperature of the outlet air. To lower the temperature, turn the dial to the left. To increase the temperature, turn the dial to the right. ...

    Nissan Rogue S Krom™ Edition
    The Nissan Rogue Krom™ Edition, which was added to the lineup in late 2009, is available in both front-wheel and all-wheel drive configurations and in just three exterior colors - Pearl White, S ...