Unlocking doors
1. Push the UNLOCK button 2 on the keyfob.
- The driver’s door unlocks.
- The hazard indicator flashes once if all doors are completely closed.
2. Push the UNLOCK button again within 5 seconds.
- All the doors and the lift gate unlock.
- The hazard indicator flashes once if all doors are completely closed.
All doors will be locked automatically unless one of the following operations is performed within 1 minute of pushing the UNLOCK button.
- Any door or lift gate is opened.
- The ignition switch is turned to the ON position.
See also:
Loading tips
- The GVW must not exceed GVWR or
GAWR as specified on the F.M.V.S.S./
C.M.V.S.S. certification label.
- Do not load the front and rear axle to
the GAWR. Doing so will exceed the
GVWR.
- ...
SAFETY
My kids' booster seats fit like a charm in the backseat. The seat belt
buckles were a little floppy, but older kids won't struggle with them. Younger
ones may need a little help buckling up on the ...
Changing engine oil
QR25DE
VQ35DE
1. Park the vehicle on a level surface and apply
the parking brake.
2. Start the engine and let it idle until it reaches
operating temperature, then turn it off.
3. Remove the ...