Fuel-filler cap
Fuel-filler cap
To remove the fuel-filler cap:
1. Turn the fuel-filler cap counterclockwise to
remove.
2. Put the fuel-filler cap on the cap holder A while refueling.
To install the fuel-filler cap:
1. Insert the fuel-filler cap straight into the fuelfiller
tube.
2. Turn the fuel-filler cap clockwise until a single click is heard.
- Gasoline is extremely flammable and highly explosive under certain conditions. You could be burned or seriously injured if it is misused or mishandled. Always stop engine and do not smoke or allow open flames or sparks near the vehicle when refueling.
- Do not attempt to top off the fuel tank after the fuel pump nozzle shuts off automatically. Continued refueling may cause fuel overflow, resulting in fuel spray and possibly a fire.
- Use only an original equipment type fuel-filler cap as a replacement. It has a built-in safety valve needed for proper operation of the fuel system and emission control system.
An incorrect cap can result in a serious malfunction and possible injury. It could also cause the malfunction indicator light to come on.
- Never pour fuel into the throttle body to attempt to start your vehicle.
- Do not fill a portable fuel container
in the vehicle or trailer. Static electricity
can cause an explosion of
flammable liquid, vapor or gas in
any vehicle or trailer. To reduce the
risk of serious injury or death when
filling portable fuel containers:
— Always place the container on
the ground when filling.
— Do not use electronic devices when filling.
— Keep the pump nozzle in contact with the container while you are filling it.
— Use only approved portable fuel containers for flammable liquid.
- If fuel is spilled on the vehicle body, flush it away with water to avoid paint damage.
- Insert the cap straight into the fuelfiller
tube, then tighten until the
fuel-filler cap clicks. Failure to tighten
the fuel-filler cap properly may
cause the 
malfunction indicator
light (MIL) to illuminate. If the
light illuminates because the fuelfiller
cap is loose or missing, tighten
or install the cap and continue to
drive the vehicle. The light
should turn off after a few driving
trips. If the light does not turn
off after a few driving trips, have the
vehicle inspected by a NISSAN dealer.
For additional information, see “Malfunction Indicator Light (MIL)” in the “2. Instruments and controls” section.
- The LOOSE FUEL CAP warning will appear if the fuel-filler cap is not properly tightened. It may take a few driving trips for the message to be displayed. Failure to tighten the fuel-filler cap properly after the LOOSE FUEL CAP warning appears may cause the Malfunction Indicator Light (MIL) to illuminate.
See also:
Speaker Adaptation (SA) mode
Speaker Adaptation allows up to two out-ofdialect
users to train the system to improve recognition
accuracy. By repeating a number of
commands, the users can create a voice model of
their own voic ...
Audio main operation
POWER/VOLUME control:
Place the ignition switch in the ACC or ON
position. Press the PWR button while the system
is off to call up the mode (radio, CD or AUX) that
was playing immediately befor ...
Exterior rear
Coupe
1. Rear window and outside mirror
(if so equipped) defroster switch
(P. 2-29)
2. Interior trunk lid release (P. 3-24)
3. Trunk lid (P. 3-23)
4. Vehicle loading (P. 9-12)
5. Opener opera ...