Heater operation
Heating:
This mode is used to direct heated air to the foot outlets.
1. Push the air recirculation button 
to the
OFF position. (The indicator light turns off.)
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control 
dial
to the
desired position.
4. Turn the temperature control dial to the desired position between the middle and the hot (right) position.
Ventilation:
This mode directs outside air to the side and center ventilators.
1. Push the air recirculation button 
to the
OFF position. (The indicator light turns off.)
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control 
dial
to the
desired position.
4. Turn the temperature control dial to the desired position.
Defrosting or defogging:
This mode directs the air to the defroster outlets to defrost/defog the windows.
1. Turn the air flow control dial to the position.
2. Turn the fan speed control dial to the
desired position.
3. Turn the temperature control 
dial to the
desired position between the middle and the
hot (right) position.
- To remove frost from the outside surface of
the windshield quickly, turn the temperature
control dial to the maximum hot position and
the fan speed control 
dial to
maximum
(HI) position.
- If it is difficult to defog the windshield, turn the A/C button on.
Bi-level heating:
This mode directs cool air from the side and center vents and warm air from the foot outlets.
When the temperature control dial is turned to the maximum hot or cool position, the air between the ventilators and the foot outlets is the same temperature.
1. Push the air recirculation button 
to the
OFF position. (The indicator light turns off.)
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control 
dial
to the
desired position.
4. Turn the temperature control dial to the desired position.
Heating and defogging:
This mode heats the interior and defogs the windows.
1. Turn the air flow control dial to the
position.
2. Turn the fan speed control 
dial
to the
desired position.
3. Turn the temperature control dial to the desired position.
See also:
Power steering fluid
The fluid level should be checked using the HOT
MAX range on the power steering fluid reservoir
at fluid temperatures of 122° - 176°F (50° -
80°C) or using the COLD MAX range on the
powe ...
AUX (Auxiliary) input
AUX IN jack:
The AUX IN jack is located on the audio unit.
The AUX IN audio input jack accepts any
standard analog audio input such as from a
portable cassette tape/CD player, MP3 player or
la ...
California perchlorate advisory
Some vehicle parts, such as lithium batteries,
may contain perchlorate material.
The following advisory is provided: “Perchlorate
Material - special handling may
apply, See www.dtsc.ca.gov/
...