Capacities and recommended fuel/lubricants

1: For additional information, see “Engine oil” in the “8. Maintenance and

1: For additional information, see “Engine oil” in the “8. Maintenance and do-it-yourself” section for changing engine oil.

2: For additional information, see “Engine oil and oil filter recommendation” later in this section.

3: Use only Genuine NISSAN CVT Fluid NS-2. Using transmission fluid other than Genuine NISSAN CVT Fluid NS-2 will damage the CVT, which is not covered by the NISSAN new vehicle limited warranty.

4: For hot climates, viscosity SAE 90 is suitable for ambient temperatures above 328F (08C).

5: Available in mainland U.S.A. through a NISSAN dealer.

6: For additional information, see “Vehicle identification” later in this section for air conditioner specification label.

See also:

2010 Nissan Murano review
You might think the second-generation Nissan Murano is not much different from the first because it has a strong visual connection, but once you're behind the wheel it's clear that the 2010 is mor ...

Operating range
The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range from the request switch (1) . When the Intelligent Key battery is discharged or ...

Overdrive (O/D) OFF switch
Overdrive (O/D) OFF switch When the O/D OFF switch is pushed with the shift selector in the D (Drive) position, the light in the instrument panel illuminates. See “Overdrive off indicator ...