Hood

(1) Pull the hood lock release handle located

(1) Pull the hood lock release handle located below the driver side instrument panel. The hood will spring up slightly.

 (2)- Push the lever at the front of the hood to the side as illustrated with your fingertips and raise the hood.

When closing the hood, lower it slowly and make sure it locks into place.

WARNING:

- Make sure the hood is completely closed and latched before driving. Failure to do so could cause the hood to fly open and result in an accident.

- If you see steam or smoke coming from the engine compartment, to avoid injury do not open the hood.

    See also:

    Engine oil pressure gauge (if so equipped)
    Engine oil pressure gauge (if so equipped) The gauge indicates the engine lubrication system oil pressure while the engine is running. When the engine speed is high, the engine oil pressure ...

    Unlocking doors
    1. Press the button on the Intelligent Key. 2. The hazard warning lights flash once. 3. Press the button again within 5 seconds to unlock all doors. All doors will be locked automatically ...

    Vehicle load capacity
    Do not exceed the load limit of your vehicle shown as “The combined weight of occupants and cargo” on the Tire and Loading Information label. Do not exceed the number of occupants shown as ...