Before starting the engine

-Make sure the area around the vehicle is clear.

- Check fluid levels such as engine oil, coolant, brake fluid, and window washer fluid as frequently as possible, or at least whenever you refuel.

- Check that all windows and lights are clean.

- Visually inspect tires for their appearance and condition. Also check tires for proper inflation.

- Lock all doors.

- Position seat and adjust head restraints and headrests (if so equipped).

- Adjust inside and outside mirrors.

- Fasten seat belts and ask all passengers to do likewise.

- Check the operation of warning lights when the ignition switch is pushed to the ON position. See Warning/indicator lights and audible reminders in the Instruments and controls section of this manual.

    See also:

    Changing engine oil
    MR20DE engine A Oil filler cap B Oil drain plug C Oil filter QR25DE engine A Oil filler cap B Oil drain plug C Oil filter 1. Park the vehicle on a level surface and apply the parking ...

    Forward-facing child restraint installation using the seat belts
    WARNING: The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not be ...

    Instrument panel
    Instrument panel 1. Side and center vents. 2. Headlight/fog light (if so equipped)/turn signal switch. 3. Steering wheel switch for audio control and Bluetooth Hands-Free Phone System. 4. ...