Installing top tether strap
First, secure the child restraint with the LATCH lower anchors (rear outboard seat positions only) or the seat belt, as applicable.
1. Flip up the anchor cover 1 from the anchor
point which is located directly behind the
child seat.
2. Position the top tether strap over the top of
the seatback 2 .>
3. Secure the tether strap to the tether anchor
point on the rear parcel shelf 3 .>
4. Refer to the appropriate child restraint installation
procedure steps in this section
before tightening the tether strap.
To remove or reinstall the tether anchor covers, see “Upper tether anchor/key cylinder covers” in the “Maintenance and do-it-yourself” section of this manual.
If you have any questions when installing a top tether strap, consult your NISSAN dealer for details.
See also:
Evocative Yet Rational
Though its uniquely styled, asymmetrical body makes a standout statement
against the backdrop of today's look-alike mainstream vehicles, Nissan Cube
presents a range of strong rational arguments f ...
Checking engine oil level
1. Park the vehicle on a level surface and apply
the parking brake.
2. Start the engine and let it idle until it reaches
operating temperature.
3. Turn off the engine. Wait more than 10
minu ...
Regulatory Information
FCC Regulatory information
– CAUTION: To maintain compliance with
FCC’s RF exposure guidelines, use only the
supplied antenna. Unauthorized antenna,
modification, or attachments could damage
...