Replacing
1. Lift the wiper arm away from the windshield.
2 Push the release tab, then move the wiper
blade down the wiper arm to remove.
3 Remove the wiper blade.
4. Insert the new wiper blade onto the wiper
arm until it clicks into place.
5. Rotate wiper blade so the dimple is in the
groove.
6. Return the wiper to its original position and
release it until it has made contact with the
windshield.
CAUTION
● After wiper blade replacement, return
the wiper arm to its original position;
otherwise it may be damaged when the
hood is opened.
● Make sure the wiper blades contact the
glass; otherwise the arms may be damaged
from wind pressure.
If you wax the surface of the hood, be careful not to let wax get into the windshield washer nozzle A . This may cause clogging or improper windshield washer operation. If wax gets into the nozzle, remove it with a needle or small pin B .
See also:
List of voice commands
When you press and release the button on
the steering wheel, you can choose from the
commands on the Main Menu. The following
pages describe these commands and the commands
in each sub-menu. ...
LATCH lower anchor
Failure to follow the warnings and
instructions for proper use and installation
of child restraints could result in
serious injury or death of a child or
other passengers in a sudden stop or ...
SAFETY
For the kids, the Juke was fun, too. They loved the way it looked, but there
was a problem with the seat belts. The buckles were too buried in the seat
cushions to make them easy to use for my 6- ...