Exterior and interior lights


Coupe
1. Mirror-mounted turn signal light
(if so equipped)
2. Interior light
3. Map light
4. Headlamp assembly
5. Fog light (if so equipped)
6. Step light
7. High-mount stoplight
8. Trunk light
9. License plate light
10. Rear combination light

Sedan
1. Rear map light
2. Front map light
3. Step light
4. Headlamp assembly
5. Fog light (if so equipped)
6. High-mount stoplight (if so equipped)
7. Trunk light
8. Spoiler mounted stoplight
(if so equipped)
9. Rear combination light
10. License plate light
11. Mirror-mounted turn signal light
(if so equipped)

Replacement procedures
All other lights are either type A, B, C or D. When replacing a bulb, first remove the lens, light and/or cover.
Indicates bulb removal
Indicates bulb installation

Step light
Use a cloth 1 to protect the housing.

Map light
Use a cloth to protect the housing.

Personal light (if so equipped)
Use a cloth 1 to protect the housing.

Interior light
Use a cloth 1 to protect the housing.

Rear combination light
To access the bulbs in the rear combination light:
1 Remove the fasteners. Carefully push back the carpet.
2 Remove the 2 nuts and pull out the rear combination light.
3 Rotate the bulb(s) counterclockwise and pull out to remove:
A Turn signal light
B Sidemarker light
C Tail/stop light
D Backup light

Trunk light
See also:
Tire and loading information label
Sedan
Coupe
The cold tire pressure is shown on the Tire and
Loading Information label. The label is located as
shown. ...
Relative humidity
Corrosion will be accelerated in areas of high
relative humidity, especially those areas where
the temperatures stay above freezing and where
atmospheric pollution exists and road salt is
used. ...
