Installing covers to rear parcel shelf
CAUTION
Make sure that the hinge is completely aligned with the pin. If the pin is forced into position, it may break.
Install the top tether anchor cover or key cylinder cover as follows:
1. With the pin on one end kept free of its hinge 1 , align the pin of the other end and slide it into the hinge 2 .
2. With the first pin in position 2 , align the second pin with its hinge slot 1 and push down on the cover to completely engage it. A snap sound will be heard.
3. Close the cover.
See also:
SPORT mode switch
SPORT mode switch
In the SPORT mode, the engine and transmission
are controlled to set the engine speed
higher than in the D (Drive) position. This
enhances throttle response for a “sport ...
Warning lights and audible reminders
Warning lights and audible reminders
1 P (Park) position selecting warning light
2 NISSAN Intelligent Key™ warning light
The Intelligent Key is equipped with a function
that is designed to m ...
Tilting the moonroof
Close the moonroof by pushing the switch
toward 2 . Release the switch,
then push
the switch toward 2 again to tilt
the
moonroof up.
To tilt the moonroof down, push the switch
toward 1 .
...